Hall effect experiment

Download Here Manaul

Aim:

1. To determine the Hall voltage developed across the sample material.
2. To calculate the Hall coefficient and the carrier concentration of the sample material.

Apparatus:

Two solenoids, Constant current supply, Four probe, Digital gauss meter, Hall effect apparatus (which consist of Constant Current Generator (CCG), digital milli voltmeter and Hall probe).

Theory:

If a current carrying conductor placed in a perpendicular magnetic field, a potential difference will generate in the conductor which is perpendicular to both magnetic field and current. This phenomenon is called Hall Effect. In solid state physics, Hall effect is an important tool to characterize the materials especially semiconductors. It directly determines both the sign and density of charge carriers in a given sample.

Consider a rectangular conductor of thickness t kept in XY plane. An electric field is applied in X-direction using Constant Current Generator (CCG), so that current Iflow through the sample. If w is the width of the sample and t is the thickness. There for current density is given by

Jx=I/wt

(1)

CCG – Constant Current Generator, J_X – current density
ē – electron, B – applied magnetic field
t – thickness, w – width
V_H – Hall voltage

If the magnetic field is applied along negative z-axis, the Lorentz force moves the charge carriers (say electrons) toward the y-direction. This results in accumulation of charge carriers at the top edge of the sample. This set up a transverse electric field E_y in the sample. This develop a potential difference along y-axis is known as Hall voltage V_H and this effect is called Hall Effect.

 A current is made to flow through the sample material and the voltage difference between its top and bottom is measured using a volt-meter. When the applied magnetic field B=0,the voltage difference will be zero.

We know that a current flows in response to an applied electric field with its direction as conventional and it is either due to the flow of holes in the direction of current or the movement of electrons backward. In both cases, under the application of magnetic field the magnetic Lorentz force, causes the carriers to curve upwards. Since the charges cannot escape from the material, a vertical charge imbalance builds up. This charge imbalance produces an electric field which counteracts with the magnetic force and a steady state is established. The vertical electric field can be measured as a transverse voltage difference using a voltmeter.

In steady state condition, the magnetic force is balanced by the electric force. Mathematically we can express it as

(2)

Where 'e' the electric charge, 'E' the hall electric field developed, 'B' the applied magnetic field and 'v' is the drift velocity of charge carriers.

And the current 'I' can be expressed as,

(3)

Where 'n' is the number density of electrons in the conductor of length l ,breadth 'w' and thickness 't'.

Using (1) and (2) the Hall voltage V_H can be written as,

(4)

by rearranging eq(4) we get

(5)

Where R_H is called the Hall coefficient.

RH=1/ne

(6)